BURTON Photon Step On® Asian Fit Snowboard Boots 2021
Experience locked and loaded power and the convenience of snowboarding’s most intuitive connection for the ultimate snowboard boot and binding system equipped with the Boa® Fit System.
The men’s Photon Step On® Boa Snowboard Boot delivers the highest level of performance with the fast, micro-adjustability of the Boa® Fit System with Coiler™ Technology. It includes Boa’s Sequence™ Configuration for even tightening and secure heel hold with the twist of a single dial.. The boot is designed specifically for the Burton men’s Step On® ® Binding to deliver unprecedented entry and exit speed with uncompromised board control in an incredibly easy to use system. Just turn the Boa dials to fine-tune the boot’s fit, then simply Step On® to the binding, and you’re ready to ride.
Mid-Stiff Flex: 7 (1=Soft,10=Stiff) – Aggressive and responsive for quick edge engagement and control at speed.
Total Comfort Construction – Get an instantly broken-in feel right out of the box. Total Comfort’s industry-exclusive construction eliminates the break-in period for a fit that feels just as good from day 1 to day 100.
1:1 Firm Flex PowerUP Tongue – Burton offers 1:1 lasting on every boot. It means every half and full size shell, tongue, and out sole offer a precise fit that is not as common as one would think. Drop your loot on a Burton boot and you won’t be stuck with the slop of a mismatched shell and liner. PowerUP tongues feature additional dual-density material for rebound and durability.
Imprint™ 3 Liner – DryRIDE Heat Cycle™ Lining | Focus Cuff Heel Hold System with Velcro® J-Bar Interface and Inner Lace Lock | Plush Cuff 1.0 (women’s only) | Lightweight Power Panels | Velcro® Liner Closure | Level 2 Molded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating | Heat-Moldable
DryRide Heat Cycle™ Lining – Warmth and wicking are two key traits for on-snow comfort. Burton’s breathable inner-lining technology utilizes interwoven thermally activated carbon thread to capture, radiate, and reflect body heat inward to keep feet warmer while also wicking heat-robbing moisture outward. Look for varying amounts and performance level of each liner.
Focus Cuff – Boosting heel-hold by hugging that sweet spot around your ankle, the Focus Cuff rides slightly higher on your ankle than the Lock-UP Cuff for increased response.
Lightweight Power Panels – To ensure a consistent flex from day 1 to 100, Burton Imprint™ and Life liners feature strategically placed Power Panels that, even after being deeply flexed, return to their original position.
Aegis™ Antimicrobial Coating – Antimicrobial coating on the lining of the boot fabric keeps your boots from creating their own mini-ecosystem of stink by preventing the growth of odor-causing bacteria.
Dual Zone Boa® System with New Sequence™ and Coiler™ Technology – All Burton men’s, women’s, and youth boots with Boa® feature the virtually indestructible, warrantied for life performance of Burton‑exclusive New England Rope laces. Built with a redesigned inner coiler spool to route the laces, the dial‑it‑in system retains its quick, easy, and effective lace adjustment. Natural fiber ropes equal a more natural flex and feel for greater all‑day comfort.
Level 2 Molded EVA Footbed – EVA Footbeds are lightweight, long-lasting, and absorb shock.
Step On™ EST® Outsole – EST® goes beyond bindings by drawing inspiration from the surf/skate heritage of snowboarding and giving you a more direct connection to your board. By eliminating the ramp angle of your outsole, EST lowers your center of gravity, improves board feel, and creates a more surf/skate-like feel.
Shrinkage™ Footprint Reduction Technology – This reduces the boot’s overall footprint one full size, meaning a men’s size 10 fits like a size 10 but has the footprint of a typical size 9. Shorter, lighter, sleeker – never suffer from toe drag again.
Sleeping Bag Reflective Foil – This low-profile and lightweight underfoot technology reflects heat back to the feet, improving both warmth and comfort when faced with cold conditions.
Recycled Rubber Content
Snow-Proof Internal Gusset – All Burton boot tongues feature an internal gusset construction to completely seal the lower zone of the boot, keeping your feet warm and dry.
Compatibility – Must Be Used with Burton Step On™ Bindings
BURTON Step On® X – Men’s Snowboard Bindings 2021
Deck out your ride with the latest in lightweight, pro-caliber control. Brand new this season, the Step On X is Burton’s most premium Step On bindings with an upgraded highback for more power and a suspension hammock system that wraps around your boot for the perfect fit.
The men’s Burton Step On Binding offers the most intuitive boot to binding connection for riders seeking both convenience and performance. Three connection points – two by the toe and one at the heel – deliver unmatched simplicity, security, and board control, while a quick release lever ensures quick and easy exit. Universally compatible with all current snowboard mounting systems, including 4×4, 3D®, and The Channel®.
Mid-Stiff Flex – (7/10) Aggressive and responsive
50:50 Carbon Fiber/Nylon Composite Blended – Supreme reactivity, weightlessness, and strengthDeck out your ride with the latest in lightweight, pro-caliber control.
Integrated Toe Hook – These loops, found on the toe side of each Step On baseplate, act as the secondary retention system, in concert with the Toe Cleats. An integrated living hinge allows riders to engage and exit from the baseplate in one single motion.
Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.
50:50 Carbon Fiber/Nylon Composite Blended
Single Component Construction – The simplicity of a one-piece hi-back means immediate response. Using Burton’s book of material secrets, they can manipulate the overall flex profile — from buttery to responsive.
Single-Component Canted Zero-Lean Hi-Back with FLAD™ – Your legs don’t go straight up, and neither should your hi-backs. This ergonomic design follows the natural contours of your left and right legs to maximize control and comfort. Riders who prefer a more playful and relaxed feel will dig the Zero Forward Lean design on select hi‑backs. As always, you can still choose to crank ‘em forward for quicker control when carving or climbing icy pipe walls.
Release Lever – The Release Lever is a low-profile, easy-access lever found on the heelcup of the binding. Pull the lever up, let it go and the boot is released, allowing the rider to step out. The handle automatically resets after you step out, allowing riders to step back on instantaneously.
Re-Ground Materials to Reduce Waste
Compatibility – Must Be Used with Burton Step On™ Boots
Compatible with All Major Mounting Systems
Re-Ground Materials to Reduce Waste